
Sewer Replacement Process Step by Step in Rancho Palos Verdes, CA
A sewer replacement follows the same steps in every Rancho Palos Verdes home: a call, a camera inspection, options from the findings, a locate and permits, the work, a final camera check, and restore.
Rancho Palos Verdes Sewer Line Pros · 2026-11-17 · Guides
The short version
Problem: The process starts with a camera inspection and a locate, so the work is planned from what the line actually looks like.
What to do: The method, trenchless or open trench, follows from the camera findings, the slope, and what sits above the line.
When to call: Call Now to start with an inspection, or to have the line checked after a backup.
Step one: the call and the first visit
The process starts with a call. The homeowner describes the problem: slow drains, a gurgling toilet, a backup in the lowest drain, a sewer smell, or a wet strip in the yard. The crew asks when the problem started, which fixtures are affected, whether it happens in rain, and whether the line has been cleaned before. Those details help the crew decide what to bring and where to look first. The homeowner describes the problem, and the crew asks when it started, which fixtures are affected, whether it happens in rain, and whether the line has been cleaned before.
The first visit is an inspection, not a dig. The crew looks at the drains, finds the cleanout or another access point, and listens to the history of the problem. A backup in progress is handled as an urgent call, and the first job is to stop the water coming in and restore flow. A problem that is not urgent is handled as an inspection, and the camera is the first tool out. A backup in progress is handled as an urgent call, and the first job is to stop the water coming in and restore flow, while a problem that is not urgent is handled as an inspection.
The homeowner should have the details ready: when the symptoms started, which drains are affected, whether neighbours have the same problem, and whether the line has been worked on before. The notes turn a vague complaint into a description the crew can work from, and they save time on site, because the crew knows where to look first. Having the details ready saves time on site, because the crew knows where to look first, and the notes turn a vague complaint into a description the crew can work from.
Step two: the camera inspection
The camera inspection runs the full lateral, from the house to the street main. A waterproof camera on a push cable is fed into the line through a cleanout or a pulled toilet, and the inside of the pipe appears on a monitor in real time. The operator sees the pipe material, every joint, every crack, every root, every belly, and the connection at the street main. The camera runs the full lateral, from the house to the street main, and the operator sees the pipe material, every joint, every crack, every root, and every belly on the monitor.
Each defect is noted with its distance from the access point and its depth, so the crew knows where to dig and how deep. The camera shows whether the line is passable, whether it is round and continuous enough to hold a liner, and whether the problem sits in the middle of the line or at the connection. The inspection is the evidence the rest of the process is built on. Each defect is noted with its distance from the access point and its depth, so the crew knows where to dig and how deep, and whether the line is passable for trenchless work.
If the line is blocked solid, it is cleared first, then inspected. A cable machine or a hydro jetter restores flow, and the camera then shows the cause of the blockage. The clearing is not the fix, but it is the step that lets the camera through, and the inspection after the clearing is what turns a clearing into a diagnosis. If the line is blocked solid it is cleared first, then inspected, because the camera needs a path, and the clearing is the step that lets the camera through to find the cause.
Step three: the options, explained from the findings
After the inspection, the crew explains what the camera found, in plain language, and what the options are. A single failed section may be a spot repair. Roots at many joints may call for lining. A badly damaged line may call for bursting or a full replacement by open trench. The options follow from the findings, not from a preference made before them. A single failed section may be a spot repair, while roots at many joints may call for lining, and a badly damaged line may call for bursting or a full replacement by open trench.
The crew explains what each option involves: how much digging, how long the work takes, what happens to the surface above the line, and what the finished line will look like on camera. A trenchless option leaves the yard largely intact. An open-trench option opens the ground along the line. A spot repair fixes one section, and the rest of the line keeps its old age. The homeowner decides with the full picture. The crew explains what each option involves, how much digging it needs, how long the work takes, and what happens to the surface above the line, so the homeowner decides with the full picture.
The method also follows from the slope and the ground. A hillside lateral on a steep grade, a line under a driveway, or a line through rock are all factors the crew explains, because they affect which method fits. The camera findings, the slope, and the surface above the line together decide the method, and the homeowner is part of that decision. A hillside lateral on a steep grade, a line under a driveway, or a line through rock are all factors the crew explains, because they affect which method fits the home.
Step four: locate and permits
The locate comes next. A beacon in the camera head sends a signal that a surface locator reads, marking the line's path and the depth of each defect on the ground above. The locate is the map for the dig, and it is what keeps a spot repair a spot repair, instead of a trench along the whole run. The locate also marks the line itself, so the crew knows where it runs before any digging begins. The locate marks the line's path and the depth of each defect on the ground above, and it is the map for the dig, keeping a spot repair a spot repair instead of a trench along the whole run.
Permits for work in the right-of-way and at the street main are handled before digging. Work on the lower lateral and the connection at the main happens in the public right-of-way and sometimes in the street itself, and it follows the city's rules. The permits are handled before the work starts, so the digging does not pause halfway through for paperwork. Permits for work in the right-of-way and at the street main are handled before digging, because work on the lower lateral happens in the public right-of-way and sometimes in the street itself.
Work that starts before the permit is in hand can bring a tripled permit fee under the city's rules, and a Stop Work Notice, so the permits are not a step to skip. The crew explains the timing when the work is planned, and the schedule follows from the permits, the locate, and the camera findings, not from a guess. Work that starts before the permit is in hand can bring a tripled permit fee under the city's rules, and a Stop Work Notice, so the permits are not a step to skip or rush.
Step five: the work, the final check, and restore
The work starts with the digging: a trench along the line, or two small pits for trenchless work. The old pipe is removed, or burst, or lined, and the new pipe is laid or formed, with the connections at the house and at the street main made and sealed. The slope of the new line is the detail that decides whether it drains, and the crew checks it as the pipe goes in. The old pipe is removed, or burst, or lined, and the new pipe is laid or formed, with the connections at the house and at the street main made and sealed by hand.
After the work, the finished line is camera-checked end to end, whatever the method. The camera confirms the new pipe is clear, continuous, and flowing with the correct fall toward the street main. The job is not finished until the camera has seen the finished line, and the homeowner is shown the findings. The footage is the record of the finished line, and it should be kept with the other records for the house. The slope of the new line is the detail that decides whether it drains, and the crew checks it as the pipe goes in, because a line laid without the correct fall will hold water no matter what it is made of.
The trench or the pits are then backfilled in layers and graded, and the surface is left ready for the homeowner to restore. The backfill is done in layers, compacted as it goes, so the new line does not settle. The lawn over the line will need time to recover, and a driveway that was opened will need its surface restored. The backfill settles over weeks, and the grading is checked as it does. The trench or pits are backfilled in layers and graded, and the surface is left ready for the homeowner to restore, while the backfill settles over weeks and the grading is checked as it does.
Related: RPV Sewer Permits · Sewer Line Replacement · sewer line repair across Rancho Palos Verdes
Related guides
GuidesWhat to Have Ready Before Sewer Repair in Rancho Palos Verdes, CA
A little preparation before sewer repair saves time on site and helps the crew find the cause faster. Here is what to have ready: the symptoms, the lowest drain, the rain pattern, the home age, and the cleanout.
ComparisonsTrenchless vs Traditional Sewer Repair in Rancho Palos Verdes, CA
Trenchless repair leaves the yard intact. Traditional repair digs a trench along the line. Which one fits your lateral depends on the camera findings — and on the slope it sits on.
GuidesHow Long Does CIPP Lining Last in Rancho Palos Verdes, CA
Cured-in-place lining is designed for a long service life, with a 50-year design life as the standard reference. What affects it is the pipe it goes into, the ground it sits in, and the work that installs it.
Frequently asked questions
Questions people ask about this topic, answered plainly.
Most residential replacements are measured in days, not weeks. A short, shallow line with clear access is faster, while a long or deep line, or a line under a driveway, takes longer. The camera inspection and the locate give the crew the information needed to plan the schedule. Most residential replacements are measured in days, not weeks, and a short, shallow line with clear access is faster, while a long or deep line takes longer to complete.
Yes, usually. Water use is paused while the line is open, and the crew explains the timing before work starts so the household can plan around it. The pause is usually measured in hours, not days, for the part of the job when the line is open. Water use is paused while the line is open, and the crew explains the timing before work starts so the household can plan around it, with the pause usually measured in hours.
The homeowner should be available at the start, to walk through the plan and the access, and at the end, to see the camera findings for the finished line. During the digging and the pipe work, the crew works on site, and the homeowner does not need to watch every step. The homeowner should be available at the start to walk through the plan and the access, and at the end to see the camera findings for the finished line.
The connection at the main is part of the job, and the camera shows it. Work at the main happens in the street and the right-of-way, and it follows the city's rules, with the permits handled before digging starts. The locate marks the connection first, so the dig opens the right place. The connection at the main is part of the job, and the camera shows it, while work at the main follows the city's rules, with the permits handled before digging starts.
The trench or pits are backfilled in layers and graded, and the surface is left ready for the homeowner to restore. A lawn over the line needs time to recover, and a driveway that was opened needs its surface restored. The backfill settles over weeks, and the grading is checked as it does. The trench or pits are backfilled in layers and graded, and the surface is left ready for the homeowner to restore, while the backfill settles over weeks.
Keep the camera footage from the final check, the written findings, and the notes about the work, including the date and what was done. The footage is the record of the finished line, and it is useful for any later work on the line, and for a future buyer who asks about the sewer. Keep the camera footage from the final check, the written findings, and the notes about the work, because the footage is the record of the finished line for any later work.
Still have questions?
Call Now to reach a local sewer professional — describe the problem and what the line has been doing.
Call now for sewer line help
Tap Call Now to reach a local sewer professional. Tell them where the problem is, what the line has been doing, and whether wastewater is coming into the home.
Hours: Mon–Fri 7:00 AM–10:00 PM PT · Sat 8:00 AM–10:00 PM PT · Sun 7:00 AM–9:00 PM PT
Before you call
- Stop using water if the line is backing up.
- Keep people and pets away from any wastewater.
- Note which drains are slow, and which one backs up first.
- Note whether the problem happens in heavy rain, or all the time.
- Have the age of the home ready, if you know it.